Light Force Switch for Pressure Applications

Cyntech Components are pleased to stock the Microprecision MP500 light force switch.

Numerous process control applications depend on pressure switches to operate reliably. To convert a physical pressure differential into an electrical signal a mechanical switch inside is used.

Microprecision Electronics SA in Vouvry, Switzerland is now offering a new variation of its MP500 sealed subminiature micro switch for this type of application. Compared to the standard version with an actuating force of max 2.5N, the new MP520 has a lower actuating force of max 1 N. The differential force is only about 0.2 N. The differential travel of less than 0.05mm and a fast change over time of 5 ms is another important parameter for process applications.

The Series MP500 is UL61058 and EN61058 approved for a power rating of 250 AC/ 5A with an operating temperature between – 40°C and 105°C. Termination options are PCB pins, solder lugs or cable. To adapt to special applications, the actuators can be custom designed.